Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

This work provides a method to predict the three-dimensional equivalent elastic properties of the filament-wound composites based on the multi-scale homogenization principle.In the meso-scale,a representative volume element(RVE)is defined and the bridging model is adopted to establish a theoretical predictive model for its three-dimensional equivalent elastic constants.The results obtained through this method for the previous experimental model are compared with the ones gained respec-tively by experiments and classical laminate theory to verify the reliability of this model.In addition,the effects of some winding parameters,such as winding angle,on the equivalent elastic behavior of the filament-wound composites are analyzed.The rules gained can provide a theoretical reference for the optimum design of filament-wound composites.     

【专题】智能化导弹质量检测方法研究

导弹是由各种类型装备组成的综合性很强的复杂系统,智能技术的引入进一步丰富了智能导弹质量特性的内涵,对质量检测和控制提出了更高要求,需要开发与之相适应的检测方法。本文先给出了智能导弹的定义和内涵,分析了其智能特性,接着概述了智能化导弹的结构组成,分析了各智能部件的功能和结构组成,从智能化导弹结构组成及测试参数、智能化部件的嵌入式软件作用、零部件机械加工精度等方面提出了智能化导弹质量检测的需求,并在此基础上结合智能化制造等技术提出了在线检测、自动检测/测试、BIT自检、软件测评技术以及弹载遥测的智能化导弹质量检测途径和方法。     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

预报风强度对火箭最大气动载荷精度影响及建模分析

针对不同预报风强度的精度以及其对应的最大气动载荷预报值精度的研究文献极少。以某地区实况风为基准,分别对不同预报风强度的精度以及其对应的最大气动载荷预报值精度特征进行了分析,并利用多元线性回归方法建立了订正模型,结果表明在预报日数第1～11天,预报风强度越大,预报风精度及其对应的最大气动载荷预报值精度越高;利用多元线性回归方法可提高最大气动载荷预报值精度,且预报风强度越小,最大气动载荷预报精度提高越明显。这些发现在火箭发射前的飞行保障及安全决策方面具有参考价值。     

XNAV中的相对论效应(III)——时空测量值的坐标转换

在文献[1-3]中求得的XNAV基本方程中,时间和距离是指太阳质心系(BCRS)中的坐标量。但在实际测量中,接收机测量的时间是时钟的固有时,接收机的位置一般应以地心系(GCRS)为基准。在相对论框架内完成这两个坐标转换,使得XNAV测量方程能够直接得到应用。最后给出了完整的XNAV高精度测量方程及其在实际测量中的计算过程。     

用于纯方位目标运动分析的泰勒级数法

以泰勒级数法的理论模型为基础,研究它在纯方位TMA中的应用问题。将泰勒级数法与高斯-牛顿法相结合,得到一种混合泰勒级数法。这种混合方法简单易懂,计算并不复杂。经蒙特卡罗仿真研究,其性能可与高斯-牛顿法相比较,对于有些态势甚至在收敛时间以及解算效果上要优于高斯-牛顿法。算法性能反映在一些典型的TMA态势上。     

排队论在导弹防御体系射击效能中的应用

针对当前空袭手段多样化、综合化和一体化的特点,运用排队论方法,设计了一种基于排队论的射击效能评估模型。该模型综合考虑了各种因素对舰空导弹射击效能的影响,当编队的配置(如防御层数、通道数量)有所变化时,依然可以灵活运用上述模型对编队射击效能做出准确评估。     

三坐标雷达目标真实高度估计算法研究

在目标跟踪领域,通过三坐标雷达的测量值(斜距、仰角及方位角)来估算目标的真实高度一直是个难点。目前主要有两类处理方法:坐标转换法和等效地球半径法。前者把与雷达天线相关的三坐标测量值转换到大地坐标系统来计算目标高度;后者充分考虑地球曲率以及大气折射的特性,通过增加地球半径来估算目标的高度。最后对上述的两类方法进行总结、比较与分析。     

气囊辅助RTM制备复合材料承力筒内腔尺寸控制技术

根据气囊充压压力与复合材料承力筒内径之间的变化关系,给出了成型复合材料承力筒内表面的气囊尺寸计算方程。分析了气囊充压压力增大对承力筒的壁厚、纤维含量和弯曲性能的影响。采用气囊辅助RTM工艺整体制备出复合材料承力筒。试验结果表明,气囊充压压力使复合材料承力筒的壁厚减薄,纤维体积含量增加,弯曲性能提高;选择适当的气囊充压压力可以制备出满足设计要求的复合材料承力筒。